Reviews, Price, Delivery Shop Now
The BALLIBOT® BalliTherm series are the 30mm mounting tube thermal imaging scopes developed for 24 hours operation under any weather and environmental conditions. Three objective lens options, ie. 35mm, 50mm and 75mm to fit the needs from short range to long range missions. The 12μm 384×288, 640×480 and 1024×768 thermal detectors provide for wider application requirements. Built-in Laser Rangefinder module and an embedded 4DOF (degree of freedom)professional ballistic calculator with G1, G7 and GA drag functions, onboard Bluetooth for synchronizing with a ballistic App for your iOS or Android smartphone. The fast wind data input and Dynamic Reticle provides for an instant POI crosshair along with advanced information including distance, angle, wind direction with arrow pointer, wind speed, holdover value, reticle grids holdover at different scope magnification for precision applications. Multiple wireless connection enable video transmission to a third display and interact with other thermal devices such as Ballibot Thermal Scouts in different environment conditions like darkness, fog, smoke, haze, snow and camouflage for patrolling and hunting, etc.
There are countless thermal scopes on the market, BALLIBOT ballistic thermal scopes is the one to catch your attention.
KEY FEATURES:
- 12μm Thermal sensor
- Built-in laser rangefinder (up to 800 m)
- Built-in 6-axis accelerometer gyroscope (slope angle indication)
- Free downloadable BALLIBOT Ballistic App for your smartphone
- Quick wind speed and direction input with wind direction arrow pointer display
- Line of Sight ballistic holdover results in MIL or MOA
- Multiple reticle options
- One-shot “Freeze-Zeroing” function and precise zoom zeroing
- Trigger video recording
- Integrated Wi-Fi for video transmission and interacting with other devices
- 15x 33mm super large eyepiece lens 2" eye relief
- Level Bubble UI provides a similar feel to the traditional scope
- Powered by one 18650 battery (recommended) or two CR123A batteries for lower costs of use (battery not included due to shipping regulations)
- Embedded 4DOF (degree of freedom) professional ballistic calculator with G1, G7 and GA drag functions, far superior than those amateur counterparts
- Bluetooth 5.0 BLE for synchronizing up to 5 custom ballistic profiles between the free BALLIBOT Ballistic App and rangefinder. Smartphone no longer needed once a profile is uploaded
- The simple 2 steps App setup to synchronize the rangefinder, minimum learning time is needed to use the App
- Dynamic POI (point of impact) crosshair from ballistic calculation and Scalable reticles (proportional to Zoom) – Balli Core engine make full use of the Ballistic Calculator by precisely indicate the holdover at any magnification power. With this level of precision, you'll make every shot count.
- Zoom wheel for smooth digital magnification
- One piece high strength 6061 aluminum body making for strength and rigidity, should be the only thermal scope did this
- The 1024×768 OLEDoS display is one generation ahead of conventional AMOLED devices, it consumes less energy and has much higher shock resistance.
APP Rifle Profile Upload
Once uploaded, no need to use phone again5 Rifle and scope setups are stored in the BalliBot Ballistics APP, it can be quickly uploaded to the BalliTherm Thermal Scopes via Bluetooth connection.
Professional BC Ballistics
G1 - G7 BC input, suitable for all types of projectiles: bullets, pellets even balls. Wide range of muzzle velocity: supersonics and subsonics. far more superior than those amateur counterparts
One Piece Body
Most of the thermal scopes are made with two pieces body, mainly because of the production costs, one piece body is made from a solid trunk of high strength 6061 aluminum, so it can be better fit in the scope rings for higher accuracy.
Rangefinder Turret
Rangefinder Turret houses the smallest Laser Rangefinder inside makes it the most low profile thermal scope.
Magnification Wheel
Vertically positioned Magnification & Adjusting Wheel provides smooth and ergonomic operation.
Without Internal Battery
Internal battery sounds like a good idea to have more battery power, but it has drawbacks, it is not convenvient for airmailling, and evetully the battery will loose it capacity, so the weight and power ratio will not be economical as time goes by.
Regular External Battery
All of BALLIBOT products will use almost the same type of regular extenal battery, because we understand the pains every user had experienced.
The 1st pain is the extra batteries of other brand scopes costs a small fortune to buy, the charging devices cost even more. Whereas regular batteries can be obtained at the frational costs, it will greatly lower the costs to use.
The 2nd pain is a night hunter always carry more than one kind of night vision gear, every gear has its own set of battery and charging device, a hunting trip has carry a heavy load of batteries and charging devices. While regular batteries can be mix used and mix charged with only one charger, it is possible to have more batteries standby for use, and no need to worry about every charger takes up a charging outlet.
Quick Wind InputWind Arrow Indicator
Smooth and quick wind speed and direction input through the Adjusting Wheel together with the wind direction arrow indicator for windage ballsitics calculation.
Dynamic Ballistic ReticleJust That Simple
At any level of the scope magnification, the Dynamic Crosshair immediately pinpoints the exact point of impact on the display when the elevation and windage is calculated, no time wasted on guessing around where to hit.
Hard Plastic CaseBetter Protection
Hard plastic box gives the BalliTherm thermal scope much better protection against dust and damage.
BalliBot Ballistic Calculator
Professional & not amateur4 DOF algorithm
Includes the bullet’s movement about its center of gravity and angle relative to its line of flight for greater accuracy.
3DOF & 4DOF Switchable
Advanced 4DOF mode for extreme long range projectiles, basic 3DOF mode for regular shooting and hunting.
5 gun profiles
It stores 5 gun and scope setup profiles for multi weapon system users, easy and convenient to switch devices.
G1 to G7 BC built-in
Ballistic Coefficient calculations of G1 standard and G7 long range bullet shapes, also the GA for airgun diabolo pellets.
BC Upload
Upload the Ballistic Coefficient input to all BalliBot hardwares such as laser rangefinders, avoid troublesome setups.
Hands free operation
Select a gun profile and upload to a Ballibot device once, then the phone is nolonger used for ballistic calculation.
BalliTherm Thermal Scope Specs
| OPTICS | OBJECTIVE FOCAL LENGTH | 35mm / 50mm / 75mm |
| DIGITAL MAGNIFICATION | 16x | |
| OBJECTIVE LENS MATERIAL | GERMANIUM | |
| FOCUSING MECHANISM | MANUAL FOCUS | |
| OCULAR MAGNIFICATION | 15X | |
| OCULAR LENS DIAMETER< | 33mm | |
| EYE RELIEF | 48mm | |
| DISPLAY TYPE | OLEDoS | |
| DISPLAY RESOLUTION | 1024×768 | |
| ELECTRONICS | LASER WAVE LENGTH | 905nm |
| RANGEFINDER RANGE | 8~800m | |
| BATTERY | 18650 x 1 or CR123A x 2 | |
| THERMAL SENSOR | 384×288 / 640×512 | |
| SENSOR PIXEL SIZE | 12μm | |
| THERMAL SENSITIVITY | <50mk | |
| SENSOR FRAME RATE | 50hz | |
| BALLISTICS | APP GUN PROFILE UPLOAD | YES |
| DYNAMIC RETICLE | YES | |
| WIND SPPED INPUT | YES | |
| WIND DIRECTION INPUT | YES | |
| LEVEL BUBBLE | YES | |
| BALLISTICS RESULTS | YES | |
| RETICLE CALCULATION | YES | |
| STRUCTURE | WATERPROOFING | IPX-3 |
| WEIGHT 35mm 50mm 75mm |
910g 880g 960g |
|
| DIMENSIONS 35mm 50mm 75mm |
350 x 76 x 82(mm) 350 x 76 x 82(mm) 376 x 76 x 97(mm) |